Control Cable Adjustment Tips |
Engine 603 |
| |
Vehicles with engine 603.96
Detach ball socket (19) and pull control pressure cable forwards until slight resistance can be felt. In this position, hold the ball socket over the ball head and attach; if necessary, adjust by means of the adjusting screw (15). |
|
Engine 103 |
| |
Vehicles with engine 103.98
Detach ball socket (19) and pull control pressure cable forwards until slight resistance can be felt. In this position, hold the ball socket over the ball head and attach; if necessary, adjust by means of the adjusting screw (15). |
|
Engine 104 |
| |
Vehicles with engine 104
Remove air cleaner.
Control pressure cable attached. Adjust control pressure cable (98) by turning adjusting screw (15) until the tips of the needles are in alignment. |
|
Engine 119 |
| |
Vehicles with engine 119
Remove air cleaner.
Turn adjusting screw (15) on bowden cable (98) until the pointer of the spacer sleeve (17) aligns with the adjusting screw. |
|
| |
Vehicles with engine 119.97
Remove air cleaner.
Slacken hexagon nuts (6) on connecting rod (8).
Turn connecting rod (8) until the tips of the needles are in alignment.
Tighten hexagon nuts (6). |
|
Engine 120 |
| |
Vehicles with engine 120
Remove air cleaner.
Turn adjusting screw (15) to adjust control pressure cable (98) until the tips of the needles are in alignment. |
|
| Towing Vehicle Tips |
| Road Test Tips |
